Clik here to view.
New protocol decoder: Stepper motor
Another protocol decoder that hasn't had an official announce yet is stepper_motor, a PD which decodes speed and position of a stepper motor.The PD takes a "step" and "direction" pin as input.You can...
View ArticleClik here to view.
KERN scale series supported
We're happy to announce that libsigrok now supports various weighing scales from KERN & SOHN GmbH.The new kern-scale driver currently supports (and was tested on) the KERN EW 6200-2NM scale and all...
View ArticleClik here to view.
New protocol decoder: Microchip MRF24J40
We're happy to announce that libsigrokdecode supports yet another new protocol decoder: mrf24j40.This PD decodes the SPI-based protocol of the Microchip MRF24J40, an IEEE 802.15.4 2.4 GHz RF tranceiver...
View ArticleClik here to view.
Hung-Chang DSO-2100 supported
We're happy to announce that libsigrok now supports another PC oscilloscope, the Hung-Chang DSO-2100 (also sold under different brand names such as Voltcraft or Protek).This is a 1999-era parallel-port...
View ArticleClik here to view.
GW Instek GDS-800 series supported
We're happy to announce that the GW Instek GDS-800 oscilloscope series is now supported in libsigrok.These are devices ranging from 60MHz bandwidth up to 250MHz, with a samplerate of 100MSa/s (or...
View ArticleClik here to view.
New protocol decoder: Modbus
Yes, it's that time of the week again — libsigrokdecode supports yet another protocol decoder since somewhat recently: modbus.In the current state the PD stacks on top of the UART decoder and decodes...
View ArticleClik here to view.
New protocol decoder: Qi
Another somewhat recently added protocol decoder for libsigrokdecode is the qi PD.This PD decodes demodulated data streams used by the Qi standard for communication from the receiver to the charging...
View ArticleClik here to view.
Velleman DVM4100 support
libsigrok now supports the Velleman DVM4100 multimeter, a 6000 counts DMM with USB connectivity.This DMM uses the Dream Tech International DTM0660 chip, which has a similar protocol as the Fortune...
View ArticleClik here to view.
sigrok-firmware-fx2lafw 0.1.3 released!
We're happy to announce the sigrok-firmware-fx2lafw 0.1.3 release. This is an open-source firmware that allows you to use any of the popular Cypress FX2 based devices as logic analyzers.The source code...
View ArticleClik here to view.
sigrok at the Chaos Communication Congress (32C3)
As in previous years various sigrok developers will be at the Chaos Communication Congress (32C3) in Hamburg, Germany. The conference takes place December 27th to 30th, 2015.There will be a sigrok...
View ArticleClik here to view.
New protocol decoder: MDIO
libsigrokdecode supports yet another protocol decoder since a while ago (which hasn't seen an official announce yet, though): mdio.This is a PD for decoding the Management Data Input/Output (MDIO)...
View ArticleClik here to view.
New logo: Works with sigrok
We've created a new sigrok-related logo that manufacturers or resellers of devices can use to advertise sigrok-compatible products: the "Works with sigrok" logo.If you're developing or selling logic...
View ArticleClik here to view.
LeCroy LogicStudio support
libsigrok now supports yet another new device. This time: the LeCroy LogicStudio.This is a 16-channel logic analyzer with up to 1GHz sampling rate (depending on the number of channels used).The device...
View ArticleClik here to view.
New protocol decoder: USB request
libsigrokdecode has received support for another, quite interesting protocol decoder recently: usb_request.This PD stacks on top of the usb_packet decoder, which in turn stacks on top of...
View ArticleClik here to view.
Korad KAxxxxP series support
We're happy to announce that libsigrok now supports the Korad KAxxxxP series of programmable power supplies, including the popular Korad KA3005P.These are all 1-channel lab power supplies with various...
View Articlelibserialport 0.1.1 released!
We're happy to announce that libserialport 0.1.1 has been released! libserialport is a portable, LGPLv3+ shared library written in C which allows users to talk to serial port devices on various OSes...
View ArticleClik here to view.
Major sigrok releases: libsigrok, libsigrokdecode, sigrok-cli, PulseView
We're happy to announce a set of major new releases of the following sigrok projects: libsigrok 0.4.0, libsigrokdecode 0.4.0, sigrok-cli 0.6.0, and PulseView 0.3.0.The tarballs are available for...
View ArticleClik here to view.
New protocol decoder: timing
libsigrokdecode now supports another protocol decoder: timing. This has been supported for a while already actually (and is part of libsigrokdecode 0.4.0), but hasn't seen an official announce yet, so...
View ArticleClik here to view.
New protocol decoder: em4100
libsigrokdecode now supports another protocol decoder, em4100.The EM4100 protocol for certain 100-150kHz RFID tags is layered on top of one of three possible modulation schemes: Manchester, Biphase, or...
View ArticleClik here to view.
PCE PCE-322A support
libsigrok now supports the PCE PCE-322A sound level meter.This is a USB-based sound level meter with various settings such frequency weighting (A or C), a frequency range of 31.5 Hz to 8 kHz, an...
View Article
